.svg "Logo (1)")
|
6MM WIDE NEOPRENE-X-PANSION LOC STRIP PROFILE GUIDE Specify Neoprene Colour & Wire Anchors |
||||
|
Brass (1mm thick side plates) |
Zinc (1mm thick side plates) |
Stainless Steel (0.7mm thick side plates) |
Overall Product Depth |
Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place) |
|
LSB-22 x 6 |
LSZ-22 x 6 |
LSS-22 x 6 |
22mm |
8mm |
|
LSB-31 x 6 |
LSZ-31 x 6 |
LSS-31 x 6 |
31mm |
15mm |
|
LSBL-40 x 6 |
LSZL-40 x 6 |
LSSL-40 x 6 |
40mm Low Loop |
30mm |
|
LSB-50 x 6 |
LSZ-50 x 6 |
LSS-50 x 6 |
50mm |
35mm |
|
LSBL-50 x 6 |
LSZL-50 x 6 |
LSSL-50 x 6 |
50mm Low Loop |
40mm |
|
LSB-65 x 6 |
LSZ-65 x 6 |
LSS-65 x 6 |
65mm |
50mm |
|
LSB-80 x 6 |
LSZ-80 x 6 |
LSS-80 x 6 |
80mm |
65mm |
|
LSB-90 x 6 |
LSZ-90 x 6 |
LSS-90 x 6 |
90mm |
75mm |
|
LSB-100 x 6 |
LSZ-100 x 6 |
LSS-100 x 6 |
100mm |
85mm |
|
LSB-115 x 6 |
LSZ-115 x 6 |
LSS-115 x 6 |
115mm |
100mm |
|
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ Some custom metal plate thicknesses available on request. |
||||
Latham 6mm Neoprene-X-Pansion Loc® Strips are generally used in interior applications where the expected thermal expansion of the floor finish would be considered less than an external application. They are also suitable for external applications, however the bay sizes or distance between the strips will need to be reduced (see pages 4-6 for further set out and spacing details).
Latham 6mm Neoprene-X-Pansion Loc® Strips with 1mm Brass and Zinc and 0.7mm Stainless Steel side plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see pages 52-53 for further installation details).
Latham 6mm Neoprene-X-Pansion Loc® Strips are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).
All Latham Neoprene-X-Pansion Loc® Strips are designed specifically for use with optional GW50/SSW50Wire Anchors for maximum control. For further information and specification details, see page 55 of catalogue.
Latham Neoprene-X-Pansion Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the floor finish.
View and download our data sheets - PDF
|
12MM WIDE NEOPRENE-X-PANSION LOC STRIP PROFILE GUIDE Specify Neoprene Colour & Wire Anchors |
||||
|
Brass (1mm thick side plates) |
Zinc (1mm thick side plates) |
Stainless Steel (0.7mm thick side plates) |
Overall Product Depth |
Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place) |
|
LSB-22 x 12 |
LSZ-22 x 12 |
LSS-22 x 12 |
22mm |
8mm |
|
LSB-31 x 12 |
LSZ-31 x 12 |
LSS-31 x 12 |
31mm |
15mm |
|
LSBL-40 x 12 |
LSZL-40 x 12 |
LSSL-40 x 12 |
40mm Low Loop |
30mm |
|
LSB-50 x 12 |
LSZ-50 x 12 |
LSS-50 x 12 |
50mm |
35mm |
|
LSBL-50 x 12 |
LSZL-50 x 12 |
LSSL-50 x 12 |
50mm Low Loop |
40mm |
|
LSB-65 x 12 |
LSZ-65 x 12 |
LSS-65 x 12 |
65mm |
50mm |
|
LSB-80 x 12 |
LSZ-80 x 12 |
LSS-80 x 12 |
80mm |
65mm |
|
LSB-90 x 12 |
LSZ-90 x 12 |
LSS-90 x 12 |
90mm |
75mm |
|
LSB-100 x 12 |
LSZ-100 x 12 |
LSS-100 x 12 |
100mm |
85mm |
|
LSB-115 x 12 |
LSZ-115 x 12 |
LSS-115 x 12 |
115mm |
100mm |
|
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ Some custom metal plate thicknesses available on request. |
||||
Latham 12mm Neoprene-X-Pansion Loc® Strips are generally used in exterior applications where the thermal expansion of the floor finishes is greater than internal floor applications.
They are also suitable for internal applications as well and are sometimes considered when architects and clients want to extend the bay size and increase the distance between control strips (see pages 4-6 for further set out and spacing details).
Latham 12mm Neoprene-X-Pansion Loc® Strips with 1mm Brass and Zinc and 0.7mm Stainless Steel side plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see pages 52-53 for further installation details).
Latham 12mm Neoprene-X-Pansion Loc® Strips are supplied in standard 1800mm lengths and should beinstalled so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).
All Latham Neoprene-X-Pansion Loc® Strips are designed specifically for use with optional GW50/SSW50 Wire Anchors for maximum control. For further information and specification details, see page 55 of catalogue.
Latham Neoprene-X-Pansion Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the floor finish.
View and download our data sheets - PDF
|
6MM WIDE NEOPRENE-X-PANSION LOC STRIPS WITH 3MM THICK SIDE PLATES PROFILE GUIDE Specify Neoprene Colour and Wire Anchors |
|||
|
Brass (3mm thick side plates) |
Zinc (3mm thick side plates) |
Overall Product Depth |
Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place) |
|
3MM-LSB-22 x 6 |
3MM-LSZ-22 x 6 |
22mm |
8mm |
|
3MM-LSB-31 x 6 |
3MM-LSZ-31 x 6 |
31mm |
15mm |
|
3MM-LSBL-40 x 6 |
3MM-LSZL-40 x 6 |
40mm Low Loop |
30mm |
|
3MM-LSB-50 x 6 |
3MM-LSZ-50 x 6 |
50mm |
35mm |
|
3MM-LSBL-50 x 6 |
3MM-LSZL-50 x 6 |
50mm Low Loop |
40mm |
|
3MM-LSB-65 x 6 |
3MM-LSZ-65 x 6 |
65mm |
50mm |
|
3MM-LSB-80 x 6 |
3MM-LSZ-80 x 6 |
80mm |
65mm |
|
3MM-LSB-90 x 6 |
3MM-LSZ-90 x 6 |
90mm |
75mm |
|
3MM-LSB-100 x 6 |
3MM-LSZ-100 x 6 |
100mm |
85mm |
|
3MM-LSB-115 x 6 |
3MM-LSZ-115 x 6 |
115mm |
100mm |
|
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ Contact Latham Australia with your requirements. |
|||
Latham 6mm Neoprene-X-Pansion Loc® Strips, with 3mm side plates are generally used in interior applications where the expected thermal expansion of floor finish would be considered less than an external application. They are also suitable for external applications as well, however the bay sizes or distance between the strips will need to be reduced (see pages 4-6 for further set out and spacing details)).
Latham 6mm Neoprene-X-Pansion Loc® Strips with 3mm side plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see pages 52-53 for further installation details). Although the 3mm side plates are harder wearing than the standard 1mm brass and zinc side plates, correctly fixed Loc® Strips, installed flush with the surrounding floor finish should not be impacted by loads and traffic.
Latham 6mm Neoprene-X-Pansion Loc® Strips, with 3mm side plates are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).
All Latham Neoprene-X-Pansion Loc® Strips are designed specifically for use with optional GW50/SSW50 Wire Anchors for maximum control. For further information and specification details, see page 55 of catalogue.
Latham Neoprene-X-Pansion Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the floor finish.
View and download our data sheets - PDF
|
12MM WIDE NEOPRENE-X-PANSION LOC STRIPS WITH 3MM THICK SIDE PLATES PROFILE GUIDE Specify Neoprene Colour and Wire Anchors |
|||
|
Brass (3mm thick side plates) |
Zinc (3mm thick side plates) |
Overall Product Depth |
Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place) |
|
3MM-LSB-22 x 12 |
3MM-LSZ-22 x 12 |
22mm |
8mm |
|
3MM-LSB-31 x 12 |
3MM-LSZ-31 x 12 |
31mm |
15mm |
|
3MM-LSBL-40 x 12 |
3MM-LSZL-40 x 12 |
40mm Low Loop |
30mm |
|
3MM-LSB-50 x 12 |
3MM-LSZ-50 x 12 |
50mm |
35mm |
|
3MM-LSBL-50 x 12 |
3MM-LSZL-50 x 12 |
50mm Low Loop |
40mm |
|
3MM-LSB-65 x 12 |
3MM-LSZ-65 x 12 |
65mm |
50mm |
|
3MM-LSB-80 x 12 |
3MM-LSZ-80 x 12 |
80mm |
65mm |
|
3MM-LSB-90 x 12 |
3MM-LSZ-90 x 12 |
90mm |
75mm |
|
3MM-LSB-100 x 12 |
3MM-LSZ-100 x 12 |
100mm |
85mm |
|
3MM-LSB-115 x 12 |
3MM-LSZ-115 x 12 |
115mm |
100mm |
|
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ Contact Latham Australia with your requirements. |
|||
Latham 12mm Neoprene-X-Pansion Loc® Strips with 3mm side plates are generally used in exterior applications where the thermal expansion of floor finishes is greater than internal floor applications.
They are also suitable for internal applications as well and are sometimes considered when architects and clients want to extend the bay size and increase the distance between control strips (see pages 4-6 for further set out and spacing details).
Latham 12mm Neoprene-X-Pansion Loc® Strips with 3mm side plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see pages 52-53 for further installation details). Although the 3mm side plates are harder wearing than the standard 1mm brass and zinc side plates, correctly fixed Loc® Strips, installed flush with the surrounding floor finish should not be impacted by loads and traffic.
Latham 12mm Neoprene-X-Pansion Loc® Strips, with 3mm side plates are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).
All Latham Neoprene-X-Pansion Loc® Strips are designed specifically for use with optional GW50/SSW50 Wire Anchors for maximum control. For further information and specification details, see page 55 of catalogue.
Latham Neoprene-X-Pansion Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the floor finish.
View and download our data sheets - PDF
.svg "Logo (2)")
