PAVA-Inlay Series

PAVA inlay

Floor & Floor-to-wall Expansion Joint Covers in Aluminium & Brass

The Latham PAVA-Inlay Series expansion joint covers offer an architecturally appealing outcome particularly for wider joint systems. They are suited to sand cement bed tilling and cement tile and paving applications, but can be equally effective with other forms of floor finishes like, carpet, vinyl, rubber, epoxy and even direct stick carpet. The systems offer generous thermal and structural movement and shrinkage. They also will accommodate limited seismic movement. The standard systems are available in Aluminium and Brass to complement most facets of architectural design, whilst incorporating the required movement element. Latham Australia can also manufacture custom designs, contact your Latham representative for further details.

Product Specifications   How to Specify Guide


Additional Information:
Good Design Neoprene Strips + Movement Joint Systems.png
Australian-Made-Logo-Colour.jpg
Latham-Genuine-Warranty-Green-Tick-Symbol

Illustrated: SGAL-100 (TM)
Aluminium Code A B C D E F G H I Movement Total Available Movement
All dimensions in millimetres. All mechanical expansion joint fixings by others.
SGAL-50 (TM) 50 418 77 65 65 50 28 185 30 +/-20mm 40mm
SGAL-75 (TM) 75 443 77 65 65 50 28 185 30 +/-20mm 40mm
SGAL-100 (TM) 100 468 77 65 65 50 28 185 30 +/-20mm 40mm
SGAL-150 (TM) 150 518 77 65 65 50 28 185 30 +/-20mm 40mm
SGAL-200 (TM) 200 568 77 65 65 50 28 185 30 +/-20mm 40mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier

 

The Latham PAVA Series SGAL floor expansion joint covers are designed to accommodate a 50mm deep inlay. The Santoprene inserts are far superior to other similar inlay joint covers available that require sealant inserts. Sealant inserts do not cope with movement and traffic. Sealant inserts depress or de-bond over time. The Sanatprene inserts ensure that even with movement occurring the expansion joint covers look neat and tidy and continue to perform without requiring maintenance. The Santoprene inserts are available in grey (standard), buff and black on specification.

This Series can carry a BFG water gutter and, if required, the Series can accommodate the Latham Fire Barrier System when the installation joint width is 50mm or wider. The overall depth below the finished floor height is 65mm.

The Latham PAVA Series Standard floor expansion joint covers are designed for normal pedestrian applications such as airport terminals, office buildings, hotels, foyers, stadiums and shopping centres. The systems offer various levels of movement in 6 directions.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: SGALL-100(TM)
Aluminium Code A B C D E F G H I Movement Total Available Movement
All dimensions in millimetres. All mechanical expansion joint fixings by others.
SGALL-50 (TM) 50 234 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-75 (TM) 75 259 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-100 (TM) 100 284 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-150 (TM) 150 334 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-200 (TM) 200 384 77 65 65 50 28 185 30 +/-10mm 20mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier

 

The Latham PAVA Series SGALL floor-to-wall expansion joint covers are designed to accommodate a 50mm deep inlay. The Santoprene inserts are far superior to other similar inlay joint covers available that require sealant inserts. Sealant inserts do not cope with movement and traffic. Sealant inserts depress or de-bond over time. The Sanatprene inserts ensure that even with movement occurring the expansion joint covers look neat and tidy and continue to perform without requiring maintenance. The Santoprene inserts are available in grey (standard), buff and black on specification.

This Series can carry a BFG water gutter and, if required, the Series can accommodate the Latham Fire Barrier System when the installation joint width is 50mm or wider. The overall depth below the finished floor height is 65mm.

The Latham PAVA Series Standard floor-to-wall expansion joint covers are designed for normal pedestrian applications such as airport terminals, office buildings, hotels, foyers, stadiums and shopping centres. The systems offer various levels of movement in 6 directions.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

    Enquire About This Product

    Illustrated: ASMP-100
    Aluminium Code Serrated Flange A B C D E F G H I Movement Total Available Movement Cover Plate Thickness
    All dimensions in millimetres. All mechanical expansion joint fixings by others.
    ASMP-25 25 250 150 50 25 22 35 30 100 +45/-15mm 60mm 4mm
    ASMP-50 50 250 150 50 25 22 35 30 100 +45/-40mm 85mm 4mm
    ASMP-75 75 250 150 50 25 22 35 30 100 +/-45mm 90mm 4mm
    ASMP-100 100 250 150 50 25 22 35 30 100 +/-45mm 90mm 4mm
    6 Way Movement
    Indoor
    Outdoor
    Water Gutter
    Fire Barrier

     

    The Latham PAVA-Inlay Series ASMP Standard floor expansion joint covers are designed to accommodate a 30mm deep inlay and have a serrated top aluminium flange for slip resistance. The systems have tapered edge surface mounted cover plates to control the movement in the structure. This Series can carry a BFG water gutter and if required the series can accommodate the Latham Fire Barrier System when the installation joint width is 50mm or wider. The overall depth below the finished floor height is 65mm. The systems offer various levels of movement in 6 directions.

    Download our technical data sheets - PDF

    Download our product data sheets - PDF

    Download our section details - CAD

    Enquire About This Product

    Illustrated: ASMPL-100
    Aluminium Code Serrated Flange A B C D E F G H I Movement Total Available Movement Cover Plate Thickness
    All dimensions in millimetres. All mechanical expansion joint fixings by others.
    ASMPL-25 25 175 125 50 25 22 35 30 100 +/-22mm 44mm 4mm
    ASMPL-50 50 175 125 50 25 22 35 30 100 +/-22mm 44mm 4mm
    ASMPL-75 75 175 125 50 25 22 35 30 100 +/-22mm 44mm 4mm
    ASMPL-100 100 175 125 50 25 22 35 30 100 +/-22mm 44mm 4mm
    6 Way Movement
    Indoor
    Outdoor
    Water Gutter
    Fire Barrier

     

    The Latham PAVA-Inlay Series ASMPL Standard floor-to-wall expansion joint covers are designed to accommodate a 30mm deep inlay and have a serrated top aluminium flange for slip resistance. The systems have tapered edge surface mounted cover plates to control the movement in the structure. This Series can carry a BFG water gutter and if required the series can accommodate the Latham Fire Barrier System when the installation joint width is 50mm or wider. The overall depth below the finished floor height is 65mm. The systems offer various levels of movement in 6 directions.

    Download our technical data sheets - PDF

    Download our product data sheets - PDF

    Download our section details - CAD

    Enquire About This Product

    Illustrated: BSMP-100
    Aluminium Code Serrated Flange A B C D E F G H I Movement Total Available Movement Cover Plate Thickness
    All dimensions in millimetres. All mechanical expansion joint fixings by others.
    BSMP-25 25 261 200 31 12 22 41 37 100 +20/-15mm 35mm 4mm
    BSMP-50 50 261 200 31 12 22 41 37 100 +/-20mm 40mm 4mm
    BSMP-75 75 261 200 31 12 22 41 37 100 +/-20mm 40mm 4mm
    BSMP-100 100 261 200 31 12 22 41 37 100 +/-20mm 40mm 4mm
    6 Way Movement
    Indoor
    Outdoor
    Water Gutter
    Fire Barrier

     

    The Latham PAVA-Inlay Series BSMP floor expansion joint covers are designed to accommodate a 33mm deep inlay and have a serrated top brass flange for slip resistance. The systems have tapered edge surface mounted cover plates to control the movement in the structure. This Series can carry a BFG water gutter and, if required, the Series can accommodate the Latham Fire Barrier System when the installation joint width is 50mm or wider. The overall depth below the finished floor height is 63mm.

    The Latham PAVA Series Standard floor expansion joint covers are designed for normal pedestrian applications such as airport terminals, office buildings, hotels, foyers, stadiums and shopping centres. The systems offer various movements in 6 directions.

    Download our technical data sheets - PDF

    Download our product data sheets - PDF

    Download our section details - CAD

    Enquire About This Product

    Illustrated: BSMPL-100
    Aluminium Code Serrated Flange A B C D E F G H I Movement Total Available Movement Cover Plate Thickness
    All dimensions in millimetres. All mechanical expansion joint fixings by others.
    BSMPL-25 25 231 200 31 12 22 41 37 100 +/-12mm 24mm 4mm
    BSMPL-50 50 231 200 31 12 22 41 37 100 +/-12mm 24mm 4mm
    BSMPL-75 75 231 200 31 12 22 41 37 100 +/-12mm 24mm 4mm
    BSMPL-100 100 231 200 31 12 22 41 37 100 +/-12mm 24mm 4mm
    6 Way Movement
    Indoor
    Outdoor
    Water Gutter
    Fire Barrier

     

    The Latham PAVA-Inlay Series BSMPL floor-to-wall expansion joint covers are designed to accommodate a 33mm deep inlay and have a serrated top brass flange for slip resistance. The systems have tapered edge surface mounted cover plates to control the movement in the structure. This Series can carry a BFG water gutter and, if required, the Series can accommodate the Latham Fire Barrier System when the installation joint width is 50mm or wider. The overall depth below the finished floor height is 63mm.

    The Latham PAVA Series Standard floor-to-wall expansion joint covers are designed for normal pedestrian applications such as airport terminals, office buildings, hotels, foyers, stadiums and shopping centres. The systems offer various movements in 6 directions.

    Download our technical data sheets - PDF

    Download our product data sheets - PDF

    Download our section details - CAD

    Enquire About This Product

    Have a question about your upcoming project or requirements?

    form-bg.jpg