Heavy Duty Series

Heavy Duty Series

Floor & Floor-to-wall Expansion Joint Covers in Stainless Steel & Aluminium

The Latham Heavy Duty Series offers a range of aluminium and stainless steel expansion joint covers suited to most heavy duty pedestrian car and truck applications. The systems in the range offer 6 way movement, whilst offering generous thermal and structural movement and shrinkage and will accommodate limited seismic movement. Systems are available in stainless steel and aluminium to complement most facets of architectural design, whilst incorporating the required movement element. The systems in the range offer 6 way movement.

Product Specifications   How to Specify Guide


Additional Information:
Good Design Neoprene Strips + Movement Joint Systems.png
Australian-Made-Logo-Colour.jpg
Latham-Genuine-Warranty-Green-Tick-Symbol

Illustrated: HHS-25
Stainless Steel Code Aluminium Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness
All measurements in millimetres. All mechanical expansion joint fixings by others. Aluminium & stainless steel cover thickness may vary, see the detailed drawing at the links below for the exact detail & cover thickness.
HHS-25 HHA-25 25 125 90 18 12 50 +25/-12mm 37mm 25mm 5mm
HHS-50 HHA-50 50 150 115 18 12 50 +/-25mm 50mm 25mm 5mm
HHS-75 HHA-75 75 175 140 18 12 50 +/-25mm 50mm 25mm 5mm
HHS-100 HHA-100 100 200 165 18 12 50 +/-25mm 50mm 25mm 6mm
HHS-150 HHA-150 150 250 215 18 12 50 +/-25mm 50mm 25mm 6mm
HHS-200 HHA-200 200 300 265 18 12 50 +/-25mm 50mm 25mm 7mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier

 

The Latham HHS and HHA Heavy Duty Pedestrian expansion joint covers are specifically intended for areas of mass movement of pedestrians, such as railway and airport concourses.The series is designed to be set into a pre-formed recess, in conjunction with mechanical fixings.

The series is available with stainless steel or aluminium cover plates and can carry a water gutter if required. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

 

Enquire About This Product

Illustrated: HHSAF-50
Stainless Steel Code Aluminium Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness
All measurements in millimetres. All mechanical expansion joint fixings by others. Aluminium & stainless steel cover thickness may vary, see the detailed drawing at the links below for the exact detail & cover thickness.
HHSAF-25 HHAAF-25 80 125 90 18 12 50 +25/-12mm 37mm 25mm 5mm
HHSAF-50 HHAAF-50 105 150 115 18 12 50 +/-25mm 50mm 25mm 5mm
HHSAF-75 HHAAF-75 130 175 140 18 12 50 +/-25mm 50mm 25mm 5mm
HHSAF-100 HHAAF-100 155 200 165 18 12 50 +/-25mm 50mm 25mm 6mm
HHSAF-150 HHAAF-150 205 250 215 18 12 50 +/-25mm 50mm 25mm 6mm
HHSAF-200 HHAAF-200 255 300 265 18 12 50 +/-25mm 50mm 25mm 7mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier

 

The Latham HHSAF and HHAAF Heavy Duty Pedestrian expansion joint covers are specifically intended for areas of mass movement of pedestrians, such as railway and airport concourses.The series is designed to be set into a pre-formed recess, in conjunction with mechanical fixings.

The series is available with stainless steel or aluminium cover plates and can carry a water gutter if required. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: HD-50
Aluminium Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness
HD-100* denotes smooth deck. All dimensions in millimetres. All mechanical expansion joint fixings by others.
HD-50 50 195 128 34 24 113 +/-36mm 72mm 50mm 6mm
HD-75 75 220 153 34 24 113 +/-36mm 72mm 50mm 6mm
HD-100* 100 245 178 34 24 113 +/-36mm 72mm 50mm 6mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier
Vehicular

 

The Latham HD Heavy Duty Vehicle expansion joint covers are specifically intended for areas of light vehicular traffic and heavy pedestrian traffic. With the spring steel centring bar acting as a shock absorber, the Series withstand the impact and vibration generated by light vehicular traffic travelling at speeds up to 20 kph.

The Series is designed to be set into a pre-formed recess, in conjunction with mechanical fixings. The Series is available with stainless steel or aluminium (ribbed) cover plates and this series can carry a water gutter if required. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: HDS-50
Stainless Steel Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness
All dimensions in millimetres. All mechanical expansion joint fixings by others.
HDS-50 50 195 128 34 24 113 +/-36mm 72mm 50mm 6mm
HDS-75 75 220 153 34 24 113 +/-36mm 72mm 50mm 6mm
HDS-100 100 245 178 34 24 113 +/-36mm 72mm 50mm 6mm
HDS-150 150 295 228 34 24 113 +/-36mm 72mm 50mm 8mm
HDS-200 200 320 253 34 24 113 +/-36mm 72mm 50mm 8mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier
Vehicular

 

The Latham HDS Heavy Duty Vehicle expansion joint covers are specifically intended for areas of light vehicular traffic and heavy pedestrian traffic. With the spring steel centring bar acting as a shock absorber, the Series withstand the impact and vibration generated by light vehicular traffic travelling at speeds up to 20 kph.

The Series is designed to be set into a pre-formed recess, in conjunction with mechanical fixings. The Series is available with stainless steel or aluminium (ribbed) cover plates and this series can carry a water gutter if required. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: EHDF-50
Stainless Steel Code A B C D E F G Movement Total Available Movement Overall Depth Cover Plate Thickness Maximum Cover Plate Point Loading (kg) *
All measurements in millimetres. All mechanical expansion joint fixings by others.
EHDF-50 50 170 105 32 12 115 20 +25/-18mm 43mm 50mm 8mm 2310
EHDF-75 75 195 130 32 12 115 20 +/-25mm 50mm 50mm 8mm 1440
EHDF-100 100 220 155 32 12 115 20 +/-25mm 50mm 50mm 10mm 1580
EHDF-150 150 270 205 32 12 115 20 +/-25mm 50mm 50mm 10mm 1120
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier
Vehicular

 

The Latham EHDF Heavy Vehicle expansion joint covers are designed for areas of heavy vehicular traffic such as loading docks. With the spring steel centering bar acting as a shock absorber.The series withstands the impact and vibration generated by vehicular traffic travelling at speeds up to 20 kph.

The series is designed to be set into a pre-formed recess, in conjunction with mechanical fixings, and has stainless steel cover plates. This series can carry a water gutter if required and can either be cast into the slab or set into a preformed recess. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System. For this system contact Latham Australia Pty Ltd before specifying with details of maximum loading, wheel diameter, width and type.

Cover Plate Loadings

Cover plate loadings indicated are calculated under vehicular conditions, based on a 150mm diameter load circle, with a maximum allowable deflection of 3.2mm when calculated in the nominal indicated joint width position. The assumed plate length is 1000mm, i.e. loads applied no closer than 500mm to end of the plate.

Loads are presumed to be for one tyre or one foot and are static, not dynamic, nor impact. The 150mm load circle is considered quite small for the loaded surface of a vehicular tyre, but some fork lifts and vertical lift devices will have surface load prints of this size. Loads have been calculated using a infinite fatigue life calculation, taking into account, stress and high cycle loading. Figures indicated are not ultimate strength of system failure figures. For further information contact your Latham Australia representative.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: NBEHDF-50
Stainless Steel Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness Maximum Cover Plate Point Loading (kg) *
All measurements in millimetres. All mechanical expansion joint fixings by others.
NBEHDF-50 50 170 130 20 20 115 +30/-6mm 36mm 50mm 8mm 2310
NBEHDF-75 75 195 155 20 20 115 +30/-6mm 36mm 50mm 8mm 1440
NBEHDF-100 100 220 180 20 20 115 +30/-6mm 36mm 50mm 10mm 1580
NBEHDF-150 150 270 225 20 20 115 +30/-6mm 36mm 50mm 10mm 1120
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier
Vehicular

 

The Latham NBEHDF Heavy Vehicle expansion joint covers are designed for areas of heavy vehicular traffic such as loading docks. With the spring steel centering bar acting as a shock absorber.The series withstands the impact and vibration generated by vehicular traffic travelling at speeds up to 20 kph.

The series is designed to be set into a pre-formed recess, in conjunction with mechanical fixings, and has stainless steel cover plates. This series can carry a water gutter if required and can either be cast into the slab or set into a preformed recess. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System. For this system contact Latham Australia Pty Ltd before specifying with details of maximum loading, wheel diameter, width and type.

Cover Plate Loadings

Cover plate loadings indicated are calculated under vehicular conditions, based on a 150mm diameter load circle, with a maximum allowable deflection of 3.2mm when calculated in the nominal indicated joint width position. The assumed plate length is 1000mm, i.e. loads applied no closer than 500mm to end of the plate.

Loads are presumed to be for one tyre or one foot and are static, not dynamic, nor impact. The 150mm load circle is considered quite small for the loaded surface of a vehicular tyre, but some fork lifts and vertical lift devices will have surface load prints of this size. Loads have been calculated using a infinite fatigue life calculation, taking into account, stress and high cycle loading. Figures indicated are not ultimate strength of system failure figures. For further information contact your Latham Australia representative.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: HDSSM-50
Stainless Steel Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness
All measurements in millimetres. All mechanical expansion joint fixings by others.
HDSSM-50 50 318 128 81 14 110 +/-25mm 50mm 46mm 6mm
HDSSM-75 75 343 153 81 14 110 +/-25mm 50mm 46mm 6mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier
Vehicular

 

The Latham HDSSM Surface Mounted Heavy Duty Vehicular expansion joint covers, with stainless steel cover plates are specifically intended for areas of domestic and light commercial vehicular traffic and heavy pedestrian traffic, where the expansion joint cover need to be installed in a surface mounted application. Where possible it is preferable to install a recessed expansion joint cover like the HDS series, when a recess has not been allowed or cannot be cut in after the event the HDSSM Series is a possible solution. With the spring steel centring bar acting as a shock absorber, the Series withstands the impact and vibration generated by light vehicular traffic travelling at speeds up to 20 kph.

The Series is designed to be surface mounted on top of a level slab in conjunction with mechanical fixings, Latham also recommend a suitable epoxy be allied to the underside of the side members, like Latham Thixotropic Epoxy Adhesive for superior securing. The Series is available with stainless steel or aluminium (ribbed) cover plates (see HDASM Series) and this series can carry a water gutter if required. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System.

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

Enquire About This Product

Illustrated: Illustrated: HDASM-50
Stainless Steel Code A B C D E F Movement Total Available Movement Overall Depth Cover Plate Thickness
All measurements in millimetres. All mechanical expansion joint fixings by others.
HDASM-50 50 318 128 81 14 110 +/-25mm 50mm 46mm 6mm
HDASM-75 75 343 153 81 14 110 +/-25mm 50mm 46mm 6mm
6 Way Movement
Indoor
Outdoor
Water Gutter
Fire Barrier
Vehicular

 

The Latham Aluminium HDASM Surface Mounted Heavy Duty Vehicular expansion joint covers are specifically intended for areas of domestic and light commercial vehicular traffic and heavy pedestrian traffic, where the expansion joint cover need to be installed in a surface mounted application. Where possible it is preferable to install a recessed expansion joint cover like the HD series, when a recess has not been allowed or cannot be cut in after the event the HDASM Series is a possible solution. With the spring steel centring bar acting as a shock absorber, the Series withstands the impact and vibration generated by light vehicular traffic travelling at speeds up to 20 kph.

The Series is designed to be surface mounted on top of a level slab in conjunction with mechanical fixings, Latham also recommend a suitable epoxy be allied to the underside of the side members, like Latham Thixotropic Epoxy Adhesive for superior securing. The Series is available with stainless steel (see HDSSM Series) or aluminium (ribbed) cover plates and this series can carry a water gutter if required. When the expansion joint width is 50mm or wider, the recess can accommodate the Latham Fire Barrier System

Download our technical data sheets - PDF

Download our product data sheets - PDF

Download our section details - CAD

 

Enquire About This Product

Have a question about your upcoming project or requirements?

form-bg.jpg